Especially fast drying 2K enamel paint with very good resistance to weather, chemical and mechanical stresses.

Especially fast drying 2K enamel paint with very good resistance to weather, chemical and mechanical stresses.

Quick-drying 2-component enamel paint with very good resistance to chemical and mechanical stresses and an elegant surface. Good resistance to metal abrasion. High ring strength even without coating.

Alpolan Email GD is recommended for use on raw MDF. Its very good filling power makes it suitable for the use of rational coating structures. It combines the functions of filler and top coat. This allows you to create beautiful full surfaces with 2–3 layers. The lacquer film is resistant to PVC and hand cream.

Colourful 2-component enamel varnish for particularly resistant and «ring resistant» top coats of wood, MDF, chipboard and foiled boards.

Water-dilutable, open-pored facade treatment with pre-greyish effect. Very good penetration. PENTO FLUID SILVERWOOD reduces swelling and shrinkage of the wood and also provides excellent moisture protection.

Pigmented, water-dilutable 2K polyurethane paint.

Colourless, quick-drying, fire-activating, solvent-based 2-component primer and top coat with a pleasant surface feel. Easy processing. Particularly suitable for applications on vertical surfaces thanks to high stability. Applicable on peroxide bleached woods.

Colourless, fast drying, brightening 2K primer and top coat with a pleasant surface feel. Easy processing. Particularly suitable for applications on vertical surfaces thanks to high stability. Applicable on peroxide bleached woods.

Colourless, quick-drying, encouraging 2-component primer and top coat with a pleasant surface feel. Good to process with very good flow. SUPREMO KLARLACK W3990 is particularly recommended for applications on vertical surfaces. Applicable on peroxide bleached woods.

Colourless 2K polyurethane paint with lightening effect for interior use. The natural look of light woods, e.g. spruce/fir, stained or left natural, is emphasised. Light-coloured hardwoods retain their natural colour and are not fired by OWEDUR 4444. The product contains a light protection agent.

Colourless 2-component polyurethane varnish for open-pored wood varnishing indoors. Maximum resistance properties. Good scratch and wear resistance, good sandability and good flow. Do not use on bleached wood. High filling power. Under optimal drying conditions, sanding and further work can be done after only one hour.

1-component lacquer for open-pored wood varnishing indoors. Significantly better resistance properties than nitrocellulose lacquers. High filling power, varnished surfaces can be glued with varnish glue. Easy to recoat and renovate, no splitting off of formaldehydes. The filling power is higher than with the usual one-component lacquers. No whitening when exposed to hot water. The product can be processed on paint lines.

Open-pored 1K wood varnish for interior use. Significantly better resistance properties than nitrocellulose lacquers. High filling power. Lacquered surfaces can be glued with lacquer glue. Easy to recoat and renovate, no splitting off of formaldehydes. The filling power is higher than with the usual 1K coatings. No whitening when exposed to hot water. The product can be processed on paint lines.

Colourless, quick-drying, inciting 2-component primer and topcoat for high-quality coatings. Easy processing. Applicable on peroxide bleached woods.

Yellowing-resistant, water-thinnable 2-component polyurethane varnish, for wood in interior areas. The surface impresses with its good scratch resistance as well as its very matt surface. HYDROPUR MERO 2595 gives painted surfaces an effect that looks like unpainted (raw wood effect).

High-quality water-thinnable, fast-drying two-component clear lacquer for interior and exterior use.

Colourful 2K-PU metallic effect paint for surfaces with a very fine structure. Gives the surface a special finish.

Colourful 2K-PU-effect paint for surfaces with a very fine structure. Gives the surface a special finish.

Fast drying, pigmented 2K-PU textured paint with high resistance to chemical and mechanical stresses. Very high covering power. Results in a pot surface in one operation.

Air-drying, glossy 2-component enamel paint with high weather and gloss resistance as well as good chemical and solvent resistance.

2-component polyurethane paint for the production of coloured surfaces indoors. OWOFINE 4364 is ring-resistant, has high elasticity and is highly resistant. The high filling power complements the properties.

2K polyurethane filler for spraying. The product is characterized by its high filling power, good flow, very fast drying and high shelf life.

Solvent-based 2-component insulating filler for spraying. On high-quality wood-based panels, this product offers a very good insulating effect in damp areas. Due to its high penetration capacity into the substrate, the filler provides optimum insulation against moisture penetration. The very high filling power as well as the high storage capacity round off the special properties of the product.

Colourless, fast drying and strongly filling primer for PUR structures. Good grindability. Suitable for the insulation of woods rich in substances. Can be applied in several layers in quick succession. Not applicable to peroxide bleached wood.

Colourless 2-component primer. Suitable for the insulation of woods rich in constituents and for the consolidation of wood-based materials such as MDF boards. Can be used as a moisture inhibiting primer. Can also be used as a glossy top coat in purely colourless structures on natural wood. Not applicable to peroxide bleached wood.

PUR HARDERS H4545 for PLATIN 4545 and SAPHIR 4558.

High-quality, low-viscosity maintenance impregnating oil for the aftercare of oxidatively and UV-oiled parquet floors as well as for the final oiling of factory oxidatively pre-oiled wooden floors. Easy handling. Dries quickly.

Low-viscosity, matt impregnating oil, based on natural raw materials. Good mechanical resistance. Parquet: For the surface treatment of wooden floors, stairs and cork floors: For surface treatment of wooden doors, tables, chairs and stairs.

2-component PU sealing lacquer with excellent resistance and exceptionally fast drying for high-quality, transparent sealing of anhydrite and cement underlays. Does not yellow.

Water-thinnable, very highly abrasion-resistant 1-component floor sealing lacquer for the environmentally friendly, odourless treatment of wooden parquet and strip floors. Resistant to light and yellowing.

Water-thinnable 2K-PU floor sealing varnish for the environmentally friendly treatment of practically all soft, hard and exotic woods. Resistant to light and yellowing. Highest abrasion resistance in the range of water dilutable sealing lacquer.

Gentle care and cleaning concentrate with natural jojoba oil. Nourishes and cares for all oxidatively oiled wood and cork floors.

Polymer dispersion for the care of all waterproof sealed parquet and cork floors. Maintains, protects and makes old floors look silky or matt again.

Well-firing parquet primer on alcohol basis. In the renovation area for the isolation of stain-forming substances from the wood substrate. Also suitable for tannin-rich woods (e.g. oak) and exotic woods; reduces the tendency to stick to the side edges and thus reduces the risk of wide tear-off joints (block tear-off).

Mild smelling, viscoplastic wood dust binder (joint filler solution) for the production of fillers and «liquid wood».

Additive against refusing, craters and fish-eyes for solvent-based coatings on difficult substrates.

Adhesion promoter for the painting of glass.

Oil and liquid binding agent.